|
French Manicure Colour
The new thinly viscous light-curing
French Manicure Gel!
French Manicure, a classic
way to do your nails that never looses its attraction. The light-curing
FM-materials have made this technique even more popular.
This is due to the fact that this technique results in a durably
polished nail without having to observe drying periods
This
polishing technique has become well-established, especially
in summer, and is a must for every nail studio. LCN has developed
a new generation of light-curing FM-resins.
They are thinly viscous and can be used under the sealing layer.
They can be applied precisely and with a clear smile line with
the help of a mask film, and are now available in different
colours.
|
|
|
 |
Step
1
Model or refill the nail as always. The nail surface must be
dust free and all the shine has been removed. The mask film
is applied with tweezers and pressed tightly onto the nail.
Especially mind the smile line.
Now apply the desired FM-Colour gel with a fine brush. Push
the FM-Colour gel towards the mask film but not over it. |
 |
Step
2
Before you cure the nails in the light unit, carefully remove
the mask film with
tweezers. The result is a precise smile line.
Now cure the FM-Colour gel layer in the light unit for two minutes. |
 |
Step
3
Cover the complete nail surface with Sealant after curing. Take
care not to cover the area of the nail bed with the dispersion
layer of the FM-Colour gel.
After having applied the Sealant layer, cure in the light unit
for two minutes. |
 |
Step
4
Remove the dispersion film with a cotton swab and smooth out
the nail edges with a fine file. Voilà, a permanent French
manicure that can be done in many colours. |
|
|
|
 |
Step
1
The coloured FM-Colour gels can be used for light-curing nail art.
You can design different geometric shapes with the help of the mask
films. The nail must be prepared as described in step 1. Use tweezers
to put the mask film on the nail from the side. Apply the selected
FM-Colour gel and cure for two minutes. |
 |
Step
2
You can now cover another area with the mask
film and apply FM-Colour gel. Cure again for two minutes. |
 |
Step
3
After curing, seal the surface with Sealant and cure this layer as
well for two minutes. |
 |
Step
4
Wipe the nail surface after curing and smooth the edges.
Your permanent nail art is ready!
|
FM-Colour
gels are available in:
01 Mint, 02 Light Blue, 03 Red, 04 Extra White, 05 Natural and 06
Lilac
Jar 15 ml / Art-No. 20268 |
|
